2pcs 9005 HB3 LED Headlight Bulbs 70W 4800LM LED Headlamp Kit 6000K
APPLICATIONS: Aftermarket LED Headlights Replacement HID/Xenon/Halogen Headlights
Advantages Compared to Halogen & HID bulbs:
* Fast ON/OFF, NO "warm up"
* Enery Saving, Much less power consumption
* No Ballast, safe for driving
* Good Cooling, Thermal Conductivity.
* Upgrade Light Distribution.
* 2 x LED Lights
* 1 x Manual
Note: Pls make sure the bulb size you choose is the right one for your vehicle before purchasing
HOW to CHOOSE the RIGHT BULB SIZE
The easiest way to find your headlight bulb type is to search for it in the Sylvania online database.
The two possible results are as follows:
1) Single Beam Bulb - the high and low beams use two separate bulbs
2) Dual Beam Bulb - the high and low beams are combined in one bulb
If your vehicle is not listed on the Sylvania site you could try these other methods to find your bulb type:
Check your vehicle owner's manual
Contact the vehicle manufacturer via your local dealer
Remove a headlight bulb and read the bulb information
*Make note of your bulb type*
LED TROUBLESHOOTING GUIDE
Q1.Do NOT Light Up
After installing the LED Kit,they do not turn on.That may be a problem of Reversed Polarity.
Q2.Headlights are Flickering
LED lights may flicker on some vehicles, that caused by the vehicle's onboard computer failing self-check test due to the NEW Led Kit you just installed. This can easily be corrected by adding a set of waring cancellers(capacitors) to your setup.
Q3. Only one side is working on my LED KIT
If one side sometimes does not turn on it could be caused by a bad bulb, led driver or wiring. To help identify which component is defective follow these steps.
If one side did not turn on, it could be caused by a defective bulb, LED driver or wiring.
Swap the LED Bulbs to opposite side.Still does not work,the bulb you have is a defective one.
b.Defective LED Driver
Swap the LED Drivers to opposite side.Still does not work,the driver you have is a defective one.
If none of these helped, please check the wiring make sure it is connected properly.